Effects of Polymer Adsorption and Desorption on Polymer Flooding in Waterflooded Reservoir
Abstract
Polymer Flooding is one of the most well-known methods in Enhanced Oil Recovery (EOR) technology, resulting in favorable conditions for displacement mechanism to lower residual oil in the reservoir. Polymers can lower mobility ratio by increasing the viscosity of injected water, hereby increasing volumetric sweep efficiency. Moreover, polymer adsorption onto the rock surface can help decrease reservoir permeability contrast. Due to absolute permeability reduction, the effective permeability to water is also reduced. Once the polymer is adsorbed onto the rock surface, polymer molecules can be desorbed with a chaser. This study is performed to further evaluate the effects of the adsorption and desorption process of polymer solutions to yield benefits on the oil recovery mechanism. A reservoir model is constructed by the reservoir simulation program called STAR® from Computer Modeling Group (CMG). Various polymer concentrations, starting times of polymer flooding process and polymer injection rates were evaluated with selected degrees of polymer desorption including 0, 50 and 100%.
According to the results, polymer desorption lowers polymer consumption, especially at low concentrations. Polymer desorption causes polymer re-employment that is previously adsorbed onto rock surface, resulting in an increase of sweep efficiency in the further period of polymer flooding process. Furthermore, the results show that waterflooding followed by earlier polymer flooding can increase the oil recovery factor whereas the higher injection rate also enhances the recovery. Polymer concentration has relationship with polymer consumption due to the two main benefits described above. Therefore, polymer slug size should be optimized based on polymer concentration.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Copyright & License
All Research Plus Journals (RPJ) publish open access articles under the terms of the Creative Commons Attribution (CC BY-SA 4.0) https://creativecommons.org/licenses/by-sa/4.0/ License which permits use, distribution and reproduction in any medium, provided the original work is properly cited & ShareAlike terms followed.
Copyright on any research article in a journal published by a RPJ is retained by the author(s). Authors grant RPJ a license to publish the article and identify itself as the original publisher. Upon author(s) by giving permission to RPJ either via RPJ journal portal or other channel to publish their research work in RPJ agrees to all the terms and conditions of https://creativecommons.org/licenses/by-sa/4.0/ License and terms & condition set by RPJ.
3rd party copyright
It is the responsibility of author(s) to secure all necessary copyright permissions for the use of 3rd-party materials in their manuscript.
Disclaimer
Research Plus Journals Open Access articles posted to repositories or websites are without warranty from RPJ of any kind, either express or implied, including, but not limited to, warranties of merchantability, fitness for a particular purpose, or non-infringement. To the fullest extent permitted by law RPJ disclaims all liability for any loss or damage arising out of, or in connection, with the use of or inability to use the content.
